HOWO chassis 6x4 drive Dry Powder & Foam Fire Truck pump flow
100L/s monitor flow 64L/s
Dry powder & foam fire truck is our multi-function combined fire
truck which adopts our new technologies, new processes, new
materials, independent research and development, using Sinotruk
Howo ZZ5347V4347D5 chassis, Shanghai CB10 / 100-XZ fire pump, 500kg
dry powder system and the use of Chinese reducing valves, and PL64
fire monitor. It is suitable for large and medium-sized cities
public security fire brigade, petrochemical companies, ports,
wharfs and other professional fire brigades.
Chassis
| Manufacturer | China National Heavy Duty Truck Group |
| Brand | SINOTRUK HOWO |
| Model | ZZ5347V4347D5 |
| Drive Type | 6x4 drive |
| Cab | double cabins with four doors |
| Wheelbase | 4325 + 1350 mm |
| Engine maximum power | 380HP |
| Chassis self weight | 9400Kg |
| Maximum allowable load | 34000Kg |
| Maximum speed | 90Km / h |
| Minimum turning diameter | <18.6 m |
| Seats | 1 + 1 + 4, the rear-row backrests with four SCBA racks. |
| Engine | inline six-cylinder, four-stroke, water cooled, turbocharged and
intercooled engine. |
| Model | D10.38-40 |
| Emission standard | China IV |
| Clutch | single dry clutch 420mm |
| Tire | 12.00-20 |
Fire Monitor
Model: PL64 fire monitor
Flow rate: 64L/S
Pressure: ≤1.0MPa
Shot range: Water ≥70m foam ≥60m
Rotation angle: horizontal 360 °
pitching: -15 ° ~ 80 °
Operation type: Manual
Extinguishing system
Pipe system:
- 1 DN150 pump suction connection at the end of the vehicle body; 1
rear water inlet pipeline with DN150 valve, special rubber elastic
connection device is offered at appropriate piping part.
- Supply line to monitor: a DN100 line from water tank to the top, A
DN100 butterfly valve and special rubber elastic connecting devices
are in the middle.
- Water outlet pipeline; There are 4 DN80 normal pressure outlet at
the rear of vehicle body, and an injection pipeline from the pump
to the tank, which is mounted with DN50 ball valve, intermediate
rubber connection zone.
- Residual water drainage pipeline: At the lowest and easy accessible
location is mounted with residual water drainage cock, it can drain
away residual water quickly when required.
- Cooling water pipeline: PTO is equipped with a forced cooling water
pipeline connected to water inlet and outlet pipeline of the pump,
mounted with valve, can drain away residual water through vacuum
process.
Dry powder system technical performance parameters:
dry powder tank
Dry powder filling capacity: 500Kg
Working pressure: 1.2 ~ 1.4MPa
Dry powder tank is a pressure vessel which is mainly welded by
Q345R material. It is made of feeding powder port, discharging
powder port, nitrogen delivery pipe and discharge powder tube, tank
nitrogen delivery pipe is a ring shape which is equipped with
multiple intake valves, so that gas and powder can mixing
uniformly, with fluidized state. The design of intake valve makes
dry powder be inaccessible to nitrogen gas delivery pipe.
All cylinders are placed in a bottle rack to supply gas for dry
powder tank. Nitrogen cylinder group is consisting of nitrogen
cylinder, bottle valve, high pressure gauge, air inflation
connection, high pressure ball valves and other components.
Water pump transmission system:
- PTO
- sandwich PTO;
- Model: YTQ800F (sandwich cycle water-cooled);
- transmission shaft:
- high balance precision automotive drive shaft, adopting special
intermediate support connection.
