Gross Vehicle Weight 20 tons 4×2 Drive 6000L Water & 2000L Foam
Tanker Firefighting Vehicle
The foam fire truck is refited from the Chassis produced by SinoTRK
Jinan Truck Co., LTD in China. The whole layout is reasonable . Equipment compartment, liquid tank
and pump room are adopt split structure with novel and coordinated
appearance. China brand fire pump is installed on rear of the
vehicle and fire monitor on roof. The compact structure makes easy operation and maintenance.
The vehicle carries 8000L fire extinguishant and with fast speed.
It's mainly used in petrochemical enterprises, oil terminals, oil
fields, airports, and full-time fire brigades in large and
medium-sized cities and enterprises.
| Vehicle | Overall Dimension (L×W×H) | 8475×2500×3400 mm |
| G.V.W | 19800 kg |
| Curb Weight | 11600 kg |
| Rated. power | 213Kw/290HP |
| Cabin | Original double cabin |
| 2+4 seats |
| Chassis | Manufacturer | Sinotruk HOWO |
| Model | ZZ5207N4617E1 |
| Drive type | 4x2 |
| Wheelbase | 4600 mm |
| Max. speed | 100 km/h |
| Min. turning diameter | ≤20 m |
| Approach angle | 16 degree |
| Departure angle | 14 degree |
| Engine type | Pressure combustion, In-line six-cylinder, water cooling,
inter-cooling, direct injection diesel engine |
| Model | WD615.87 |
| Max. torque | 1160N.M |
| Emission standard | Euro II |
| Clutch | pull type diaphragm |
| Gearbox | Manual, 10 forward gear |
| Fire pump | Model | CB10/60 normal pressure pump |
| Pressure/ Flow | 1.0MPa/3600Liters/min |
| Max. vacuum degree | ≥85 kPa |
| Priming time | ≤50s |
| Suction depth | 7m |
| Foam Proportioner | PH48, manual |
| Mixing ratio: | 3%, 6% |
| Fire monitor | Model | PL48 manual water/foam fire monitor |
| Position | At the top of vehicle |
| Flow | 1.0Mpa/ flow rate: 2880L/M |
| Range | Foam range:≥55m, water range:≥60m (1.0Mpa) |
| Rotation angle | Level≥360° |
| Max. elevation angle≥+45° |
| Max. depression angle≥-7° |
| Tanker | Capacity | Water: 6000 Liters, Foam:2000 Liters |
| Material | High Quality Stainless Steel 304 |
| Structure | Total side girder structure |
| Technical requirements | Conform to rule GA39.4-92 |
| Equipment room | Material | High strength aluminum alloy profiles |
| Structure | Welding structure |
| Equipment compartment door | the light quality aluminum alloy, with shutter doors, lightweight
and reliable. |
| Internal structure | the inner frame for the introduction of aluminum lap technology,
can maximize space utilization and variability within the
equipment, users can request allocation of various sliding bracket,
carriage, rotating frame, and high strength plastic storage box and
so on, the structure from the space utilization, aesthetic
appearance, ease of handling equipment have reached the
international advanced level. |
FAQ:
1. Q:Are you a factory or a trade company?
A: Shanghai Jindun Special Vehicle equipment Co., LTD is one of the
biggest factories for special vehicles in China.
2. Q:Where is your factory located?
A:We are located in Shanghai Province,China.
3. Q:What's your payment method?
A: T/T and L/C are preferred.
4.Q:Do you arrange shipment for the vehicles?
A:Yes, we can arrange shippment based on trade terms.
5. Q: How is the packing?
A:All the packing comply with exporting standard.
6. Q: What's the delivery time?
A: 1) 20 days delivery upon receipt of advance deposit if we have
ready in stock for normal standard model.
2) ISUZU & Chinese brand chassis 3 months upon receipt of advance
deposit.
3) European brand chassis 9 months upon receipt of advance deposit.
Any other questions, please do not hesitate to contact with us.
