Small-sized light Duty 3500 Litre Foam Tanker Fire Trucks with
30L/S Pump
JDX5100GXFPM35/B foam fire truck adopts QL11009KARY ISUZU chassis,
USA HALE AP32 fire pump, USA AKRON 3430 fire monitor and other
fire-fighting equipment. It is usually used by public security fire
brigades in large and medium cities, petrochemical companies and
airports and other professional fire brigade.The vehicle has the
features of a good structure and reasonable layout, easy operation
and maintenance.
1,Whole vehicle
1.1 Fire extinguishing agent capacity(L): water:2320,Foam:1065
1.2 Crew member: 3
1.3 PTO Broken Shaft (Pneumatic Control)
2,Crew room
3.1 Structure: Carbon steel skeleton, mask is bonded to LF2
aluminum alloy plate.
3.2 Seat setting: 3 seats. There are three air breathing apparatus
racks at the backrest.
3,Pump and piping system
3.1 Water pump
| Manufacturer | China |
| Model | CB10/30 type |
| Pressure / flow | 1.0MPa / 30L / s |
| Water diverter | |
| Type | Piston vacuum pump |
| Maximum vacuum | ≥85 kPa |
| Suction | 7 m |
| Water diversion time | ≤35s |
| Foam Proportion Mixer Model | PH48 |
3.2 Piping system
| Inlet | There is a Φ100mm suction port at the rear of the pump room. A
water inlet with a Φ100mm manual butterfly valve for connection to
the water tank. |
| Water injection port | There is one Φ80mm tank water inlet on each side of the pump room.
A pump with a DN65 manual ball valve at the rear of the tank is
filled into the tank. |
| Water outlet | There is one Φ80mm water outlet with ball valve on each side of the
pump room, and one DN80 gun line is set behind the tank. |
| Residual water pipeline | In order to protect the water pump and each ball valve, a residual
water ball valve is installed in the pipeline. |
| Cooling water piping | In order to protect the normal operation of the power take-off,
additional cooling devices are provided in the pipeline. |
| External suction line | G1 1/2" manual ball valve and KY40 tube interface are used. |
FAQ:
1. Q:Are you a factory or a trade company?
A: Shanghai Jindun Special Vehicle equipment Co., LTD is one of the
biggest factories for special vehicles in China.
2. Q:Where is your factory located?
A:We are located in Shanghai Province,China.
3. Q:What's your payment method?
A: T/T and L/C are preferred.
4.Q:Do you arrange shipment for the vehicles?
A:Yes, we can arrange shippment based on trade terms.
5. Q: How is the packing?
A:All the packing comply with exporting standard.
Any other questions, please do not hesitate to contact with us.
